As a common bearing, the head bowl bearing is often expensive, and most of them are customized by the manufacturer. This has led to many users needing to pay attention to the bearing lubrication methods of different products. This issue will briefly explain some common lubrication methods.

1. Bearing oil drop lubrication method

The products wholesaled by the head bowl bearing manufacturer are suitable for bearing parts that require quantitative supply of lubricating oil. It is better to drip oil once every 3-8 seconds. Excessive oil will cause the bearing temperature to rise.

2. Oil bath lubrication cam bearing

Oil bath lubrication is a very common lubrication method for cam bearings, suitable for lubrication of low and medium speed bearings. Soak part of the bearing in the groove, drive the lubricating oil by rotating the bearing component, and then return to the oil groove. The oil surface should be slightly smaller than the middle of the smallest rolling block.

3. Radiation lubrication of bearings

Use an oil pump to spray high-pressure oil into the bearing through the injection port, and then enter the oil tank through the other end of the bearing. When the bearing moves at high speed, the rollers and rollers also drive the surrounding airflow at a considerable speed to generate vortices. It is difficult to send lubricating oil into the bearing in some smooth ways. At this time, the smoothing oil must be sprayed into the bearing in a low-pressure radiation way. The nozzle should be placed between the inner ring and the bracket.

4. Methods for circulating lubrication of bearings

Through the oil pump, send excess oil to the cam support, and then filter and cool it according to the lubricating oil behind the bearing. Because the circulating oil can take away a certain amount of heat and reduce the temperature, it is suitable for high-speed bearing parts.

5. Oil injection lubrication of bearings

The dry gas is mixed with the smoothing oil through the sprayer to form an oil mist. In the customized products of motorcycle head bowl bearings, the cyclone can play a cooling role and prevent impurities from entering. This method is suitable for smooth processing of high-speed and low-temperature bearing parts.

Although the rolling noise of the bearing is inevitable, the correct use of the bearing and the correct use of the bearing can reduce noise and vibration.