The use and suitability of bowl bearings require not only the user's own understanding, but also the manufacturer's early warning in this regard and analysis of relevant content, which is also the relevant content to be explained in this issue.

1. Selection of matching

The inner diameter and diameter of the thin-walled bearings produced by the military industry manufacturer are produced according to standard tolerances. The elasticity between the inner, outer, and outer bearings and the seat hole can only be achieved by adjusting the tolerances of the journal and the valve hole. The matching of the inner ring of the bearing and the shaft adopts the basic hole system, and the matching of the outer bearing and the support hole adopts the basic shaft type.

To correctly select the matching, you must know the special load, working temperature and other requirements of the bearing, which is actually difficult. Therefore, in most cases, the abrasive is selected according to the use of the stainless steel bearing manufacturer.

2. Load size

The amount of over-win between the collar and the shaft box is determined by the amount of load. The larger the load, the smaller the over-win.

Instructions for use: Rolling bearings are very precise components, so you must be vigilant during use. Even high-performance bearings cannot achieve the desired effect if they are not used correctly. Therefore, when using bearings, pay attention to the following matters:

1. Keep the bearings and the surroundings clean. Even tiny dust entering the bearings will make the bearings more abrasive, vibrate, and make noise.

2. Be careful and careful when installing. Do not use strong punching, do not hit the bearings directly with a hammer, and do not pass pressure by rolling objects.

3. Use the right tools correctly. Ceramic bowl bearing manufacturers recommend ordinary tools. Use cloth and short fibers as much as possible.

4. Prevent the bearing from rusting. Do not hold it with your hands when using it. Apply high-quality mineral oil first. Especially in the rainy season and summer, pay special attention to rust prevention.